Water Damage Restoration – A Brief Preview
It’s the process of repairing a home or property to its pre loss condition. Injury to the property might be due to an overflow, flood or any other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. You will find two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage as a result of water guide is the benchmark tool that is employed by companies that specialize in restoration of water damage. water damage restoration Des Moines, IA
Loss Assessment and Categorization
Loss evaluation is the initial and the most crucial part of water damage restoration. The assessment needs to be correct so that the appropriate response can be taken. In restorating the damage due to water, technicians and the insurance companies must come together and understand what is damaged and how to begin restoring the damage. Identifying the foundation of the damage, documentation of damage, and accurate estimates are mandatory for a suitable water damage restoration. Categorization is based on the contamination levels of the water source. The categories are listed below
Category 1 – This really is water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This really is water that has some contaminants like water from the dishwasher, washing machine or toilet with urine.
Category 3 – This really is water that is highly unsanitary and is capable of causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.
Decontamination and Drying
After the evaluation is complete, the process of drying and decontaminating begins at the site. Based on the extent of damage, damage caused as a result of water can be classified into 4 types. Class 1 Damage- When loss is fixed to a tiny area and less water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – When the damage would be to the entire room and carpet area. Class 3 Damage – When the entire area is saturated with water and Class 4 Damage – when there are numerous deep saturation pockets. Decontamination and drying is just a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments have to be used. Decontamination needs to be achieved if contamination has been detected in the area. Decontamination may be achieved for your area or in specific pockets where contamination has been detected.